FRONT AXLE HUB BOLT > REPLACEMENT |
| 1. REMOVE FRONT WHEEL |
| 2. SEPARATE FRONT DISC BRAKE CALIPER ASSEMBLY |
![]() |
Remove the 2 bolts and separate the front disc brake caliper assembly.
| 3. REMOVE FRONT DISC |
![]() |
Remove the front disc.
| 4. REMOVE FRONT AXLE HUB BOLT |
![]() |
Temporarily install the 2 nuts and 2 washers to the front axle hub bolt as shown in the illustration.
Align the front axle hub bolt with steering knuckle cutout A as shown in the illustration.
Using SST and a brass bar or an equivalent tool to hold the front axle, remove the front axle hub bolt.
| 5. INSTALL FRONT AXLE HUB BOLT |
![]() |
Install a washer and nut to a new front axle hub bolt as shown in the illustration.
Using a brass bar or an equivalent tool to hold the front axle, install the hub bolt by tightening the nut.
| 6. INSTALL FRONT DISC |
![]() |
Align the matchmarks and install the front disc.
| 7. INSTALL FRONT DISC BRAKE CALIPER ASSEMBLY |
![]() |
Install the front disc brake caliper assembly to the steering knuckle with the 2 bolts.
| 8. INSTALL FRONT WHEEL |