REAR AXLE HUB BOLT > REPLACEMENT |
| 1. REMOVE REAR WHEEL |
| 2. SEPARATE REAR DISC BRAKE CALIPER ASSEMBLY |
![]() |
Remove the 2 bolts and separate the rear disc brake caliper assembly.
| 3. REMOVE REAR DISC |
![]() |
Put matchmarks on the rear disc and the axle hub.
![]() |
Release the parking brake and remove the rear disc.
| 4. REMOVE REAR AXLE HUB BOLT |
![]() |
Temporarily install the 2 nuts and 2 washers to the rear axle hub bolt as shown in the illustration.
Using SST and a brass bar or an equivalent tool to hold the hub and bearing assembly, remove the rear axle hub bolt.
| 5. INSTALL REAR AXLE HUB BOLT |
![]() |
Install a washer and nut to a new rear axle hub bolt as shown in the illustration.
Using a brass bar or an equivalent tool to hold the hub and bearing assembly, install the rear axle hub bolt by tightening the nut.
| 6. INSTALL REAR DISC |
![]() |
Align the matchmarks and install the rear disc.
| 7. INSTALL REAR DISC BRAKE CALIPER ASSEMBLY |
![]() |
Install the rear disc brake caliper assembly with the 2 bolts.
| 8. INSTALL REAR WHEEL |