Home › HEATER & AIR CONDITIONING SYSTEM › AIR CONDITIONING › CONDENSER

CONDENSER > ON-VEHICLE INSPECTION

for Preparation Click here



1. INSPECT COOLER CONDENSER ASSEMBLY
  1. If the cooler condenser assembly fins are dirty, clean them with water and dry with compressed air.

    NOTICE:
    Do not damage the cooler condenser assembly fins.

  1. If any cooler condenser assembly fins are bent, straighten them using a screwdriver or pliers.



2. INSPECT CONDENSER FOR LEAKAGE OF REFRIGERANT
  1. Using a gas leak detector, check pipe joints for gas leakage.

  1. If gas leakage is detected in a joint, check the torque of the joint.