Home › HEATER & AIR CONDITIONING SYSTEM › AIR CONDITIONING › AIR CONDITIONING SYSTEM (for Automatic Air Conditioning System)

DTC    B1474/74    A/C Inverter Malfunction

for Preparation Click here


DESCRIPTION


DTC No.
DTC Detecting Condition
Trouble Area
B1474/74
A/C inverter malfunction
  1. Compressor with motor assembly
  2. CAN communication system

INSPECTION PROCEDURE

CAUTION:
  1. Wear electrically insulated gloves and pull out the service plug grip before inspection as procedures may require disconnecting high-voltage connectors. Be sure to carry the removed service plug grip to prevent other technicians from accidently reinstalling it.
  2. Do not touch the high-voltage connectors or terminals for 5 minutes after the service plug grip is removed.
  3. After removing the service plug grip, turning the power switch on (READY) may cause a malfunction. Do not turn the power switch on (READY) unless instructed by the repair manual.

1.CHECK CAN COMMUNICATION SYSTEM
  1. Using the Techstream, check if the CAN communication system is functioning normally.

    Result:
    Result
    Proceed to
    CAN DTC is not output
    A
    CAN DTC is output
    B



B
GO TO CAN COMMUNICATION SYSTEM (Click here)
A

REPLACE COMPRESSOR WITH MOTOR ASSEMBLY