Home › ENGINE › 3MZ-FE EMISSION CONTROL › FUEL VAPOR CONTAINMENT VALVE

FUEL VAPOR CONTAINMENT VALVE > INSPECTION

for Preparation Click here



1. INSPECT FUEL VAPOR CONTAINMENT VALVE


    A112446E01
  1. Check the fuel vapor containment valve.

    1. Measure the resistance.

      Standard resistance:
      Tester connection
      Specified Condition
      1 - 2
      25 to 30 Ω at 20°C (68°F)

      If the result is not as specified, replace the fuel vapor containment valve.