Home › BODY ELECTRICAL › NAVIGATION › NAVIGATION SYSTEM

DTC    58-42    Map Disc Read Error

DTC    80-42    Map Disc Read Error

for Preparation Click here


DESCRIPTION


DTC No.
DTC Detection Condition
Trouble Area
58-42
  1. Player error
  2. Scratches or dirt on the disc
  3. Access to an invalid address due to software error
  1. Map disc
  2. Navigation receiver assembly
80-42
  1. Player error
  2. Scratches or dirt on the disc
  3. Access to an invalid address due to software error

INSPECTION PROCEDURE

HINT:
After the inspection is completed, clear the DTCs.

1.CHECK MAP DISC


    I100152
  1. Check that the map disc is not deformed or cracked.

    OK:
    No deformations or cracks on the map disc.



NG
Go to step 4
OK


2.DISC CLEANING


    I100201E04
  1. Disc cleaning

    1. If dirt is on the disc surface, wipe it clean with a soft cloth from the inside to the outside in a radial direction.

      NOTICE:
      Do not use a conventional record cleaner or anti-static preservative.


NEXT


3.DTC CLEAR AND RECHECK
  1. Clear the DTCs (Click here).

  1. Recheck for DTCs and check if the same trouble occurs again.

    OK:
    The same problem does not occur.



NG
Go to step 4
OK

END 

4.REPLACE MAP DISC
  1. Replace the map disc.

  1. Clear the DTCs and recheck for DTCs.

  1. Check if the same trouble occurs again.

    OK:
    The same problem does not occur.



NG
REPLACE NAVIGATION RECEIVER ASSEMBLY (Click here)
OK

END