Home › HYBRID SYSTEM · P310 › HYBRID VEHICLE CONTROL › FRONT CIRCUIT BREAKER SENSOR

FRONT CIRCUIT BREAKER SENSOR > INSPECTION

for Preparation Click here



1. INSPECT NO. 1 CIRCUIT BREAKER SENSOR


    A112781E09
  1. Measure the resistance according to the value(s) in the table below.

    Standard resistance:
    Tester Connection
    Specified Condition
    1 (SIF-) - 2 (SIF+)
    0.65 to 1.0 kΩ at 20°C (68°F)