Home › BODY ELECTRICAL › DOOR LOCK › DOOR CONTROL SWITCH

DOOR CONTROL SWITCH > REMOVAL

for Preparation Click here



1. REMOVE FRONT ARMREST UPPER BASE PANEL


    B172922E01
  1. Using a screwdriver with the tip wrapped with protective tape, disengage the 7 claws and clip, and remove the front armrest upper base panel.

  1. Disconnect the connector.



2. REMOVE POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY (for Driver Side)


    B172926
  1. Remove the 3 screws and the power window regulator master switch assembly.



3. REMOVE DOOR CONTROL SWITCH ASSEMBLY (for Front Passenger Side)


    B174116
  1. Disengage the 2 claws and remove the door control switch assembly.