Home › BODY › ENGINE HOOD / DOOR › BACK WINDOW SUPPORT

BACK WINDOW SUPPORT > DISPOSAL

for Preparation Click here



1. DISPOSE OF BACK WINDOW STAY ASSEMBLY
  1. Secure the back window stay assembly horizontally in a vise with the piston-rod pulled out.



    B127037E01
  1. Wear safety glasses. Use a metal saw to slowly cut a groove between A and B shown in the illustration to release the gas.

    NOTICE:
    Although the gas inside the back window stay assembly is colorless, odorless, and harmless, metal debris may scatter. Therefore, cover the back window stay assembly with a piece of cloth or other material.