Home › BODY › ENGINE HOOD / DOOR › BACK DOOR SUPPORT

BACK DOOR SUPPORT > REMOVAL

for Preparation Click here



1. REMOVE BACK DOOR STAY ASSEMBLY

NOTICE:
  1. Avoid touching the piston rod as much as possible to prevent foreign matter from attaching to it. Be sure to hold the cylinders while servicing.
  2. Do not wear cotton gloves or other similar materials when handling the piston rod. Fibers may attach to the rod and result in gas leaks.
  3. Do not apply any horizontal load to the door stay in the in order to prevent the piston rod from deforming.



    B172978
  1. Remove the 4 bolts and back door stay assembly.

    NOTICE:
    Remove the back door stay assembly while supporting the back door by hand.