Home › CRUISE CONTROL SYSTEM › CRUISE CONTROL › CRUISE CONTROL SYSTEM

DTC    P0607    Input Signal Circuit Malfunction

for Preparation Click here


DESCRIPTION

This DTC indicates internal abnormalities of the hybrid vehicle control ECU.

DTC No.
Detection Item
Trouble Area
P0607
The hybrid vehicle control ECU has a supervisory CPU and control ECU inside. When each input STP signal is different for 0.15 sec. or more, this trouble code is output.
This trouble code is output after 0.4 sec. has passed from the time the cruise cancel input signal (STP input) is input into the hybrid vehicle control ECU.

HINT:
When a trouble code is detected, the fail safe must be kept on until the power switch is turned off.

Hybrid vehicle control ECU

INSPECTION PROCEDURE

1.REPLACE HYBRID VEHICLE CONTROL ECU
  1. Replace the hybrid vehicle control ECU (Click here).


NEXT

END