Home › BODY ELECTRICAL › AUDIO / VISUAL › AUDIO AND VISUAL SYSTEM

DTC    44-78    DSP Error

for Preparation Click here


DESCRIPTION


DTC No.
DTC Detection Condition
Trouble Area
44-78
Error occurs during decode proceeding (MP3/WMA)
Television display assembly

INSPECTION PROCEDURE

HINT:
After the inspection is completed, clear the DTCs.

NOTICE:
  1. This code may be output even when a malfunction does not exist.
  2. When this code is output frequently, replace the television display assembly.

1.CLEAR DTC
  1. Clear the DTC (Click here).

    HINT:
    This DTC does not indicate a malfunction.


NEXT


2.RECHECK DTC
  1. Recheck the DTC and check if the same trouble code occurs again.

    OK:
    Malfunction disappears.



NG
REPLACE TELEVISION DISPLAY ASSEMBLY
OK

END