Home › STEERING › POWER STEERING › POWER STEERING SYSTEM

DTC    C1554    Power Supply Relay Failure

for Preparation Click here


DESCRIPTION

If the power steering ECU detects these DTCs, it will shut off the motor relay circuit (built into the power steering ECU) and stops power assist.

DTC No.
DTC Detection Condition
Trouble Area
C1554
Power source relay circuit malfunction
Power steering ECU

INSPECTION PROCEDURE

1.RECONFIRM DTC
  1. Clear the DTCs (Click here).

  1. Check for DTCs (Click here).

    OK:
    DTC is not output.



NG
REPLACE POWER STEERING ECU (Click here)
OK

CHECK INTERMITTENT PROBLEMS