Home › STEERING › POWER STEERING › POWER STEERING SYSTEM

DTC    C1531    ECU Malfunction

DTC    C1532    ECU Malfunction

DTC    C1533    ECU Malfunction

DTC    C1534    ECU Malfunction

for Preparation Click here


DESCRIPTION

If the power steering ECU detects these DTCs, it will shut off the motor relay circuit (built into the power steering ECU) and stop power assist. However, power assist continues if DTC C1533 is output.

DTC No.
DTC Detection Condition
Trouble Area
C1531
ECU internal malfunction (CPU malfunction)
Power steering ECU
C1532
ECU internal malfunction (Peripheral circuit malfunction)
Power steering ECU
C1533
ECU internal malfunction (Substrate temperature sensor malfunction)
Power steering ECU
C1534
ECU internal malfunction (EEPROM error)
Power steering ECU

INSPECTION PROCEDURE

1.RECONFIRM DTC
  1. Clear the DTCs (Click here).

  1. Check for DTC (Click here).

    OK:
    DTC is not output.



NG
REPLACE POWER STEERING ECU (Click here)
OK

CHECK INTERMITTENT PROBLEMS