Home › BRAKE › PARKING BRAKE › PARKING BRAKE PEDAL

PARKING BRAKE PEDAL > REASSEMBLY

for Preparation Click here



1. INSTALL PARKING PEDAL PAD


    C165707
  1. Install the parking pedal pad to the parking brake pedal.



2. INSTALL PARKING BRAKE SWITCH ASSEMBLY


    C165702
  1. Install the parking brake switch assembly to the parking brake pedal with the screw.

    Torque:
    0.9 N*m{ 9 kgf*cm , 8 in.*lbf }



3. INSTALL NO. 1 PARKING BRAKE CABLE ASSEMBLY
  1. Pass the No. 1 parking brake cable assembly through the parking brake pedal.



    C165704
  1. Install the clip to the No. 1 parking brake cable assembly.



    C165703
  1. Temporarily install the adjusting nut.



    C165706
  1. Bend the parking brake pedal claw.