Home › BRAKE › PARKING BRAKE › PARKING BRAKE CABLE

PARKING BRAKE CABLE > REMOVAL

for Preparation Click here



1. REMOVE PARKING BRAKE CONTROL PEDAL ASSEMBLY

HINT:
Refer to the instructions for REMOVAL of the parking brake pedal (Click here).



2. REMOVE NO. 1 PARKING BRAKE CABLE ASSEMBLY


    C165703
  1. Remove the adjusting nut.



    C165704
  1. Remove the clip.



    C165705
  1. Pull up the parking brake pedal claw and remove the No. 1 parking brake cable assembly.



3. REMOVE REAR WHEEL


4. SEPARATE REAR DISC BRAKE CALIPER ASSEMBLY


    C165996
  1. Remove the 2 bolts and separate the rear disc brake caliper assembly.

    NOTICE:
    Use wire or an equivalent tool to keep the brake caliper from hanging down by the flexible hose.



5. REMOVE REAR DISC


    C166438E01
  1. Put matchmarks on the rear disc and the axle hub.



    D028126
  1. Release the parking brake and remove the rear disc.

    HINT:
    If the disc cannot be removed easily, turn and press firmly the shoe adjuster until the wheel comes free.



6. REMOVE NO. 1 PARKING BRAKE SHOE RETURN TENSION SPRING


    C166147
  1. Remove the 2 No. 1 parking brake shoe return tension springs.



7. SEPARATE NO. 1 PARKING BRAKE SHOE ASSEMBLY


    C166148
  1. Remove the No. 1 parking brake shoe hold down spring cup, parking brake shoe hold down spring and No. 2 parking brake shoe hold down spring cup, and separate the No. 1 parking brake shoe assembly from the backing plate.



8. REMOVE PARKING BRAKE SHOE STRUT


    C166149
  1. Remove the parking brake shoe strut and the parking brake shoe strut compression spring.



9. SEPARATE NO. 2 PARKING BRAKE SHOE ASSEMBLY


    C166150
  1. Remove the No. 1 parking brake shoe hold down spring cup, parking brake shoe hold down spring and No. 2 parking brake shoe hold down spring cup, and separate the No. 2 parking brake shoe assembly from the backing plate.



10. REMOVE PARKING BRAKE SHOE ADJUSTING SCREW SET


    C166151
  1. Remove the parking brake shoe adjusting screw set.



11. REMOVE NO. 1 PARKING BRAKE SHOE ASSEMBLY


    C166152
  1. Separate the No. 2 parking brake shoe return tension spring and remove the No. 1 parking brake shoe assembly.



12. REMOVE NO. 2 PARKING BRAKE SHOE RETURN TENSION SPRING


    C166153
  1. Remove the No. 2 parking brake shoe return tension spring from the No. 2 parking brake shoe assembly.



13. REMOVE NO. 2 PARKING BRAKE SHOE ASSEMBLY WITH PARKING BRAKE SHOE LEVER


    C166154
  1. Using needle-nose pliers, separate the No. 3 parking brake cable assembly from the parking brake shoe lever as shown in the illustration.

    NOTICE:
    Be careful not to damage the No. 3 parking brake cable assembly.



14. REMOVE NO. 3 PARKING BRAKE CABLE ASSEMBLY


    C166156
  1. Remove the 2 bolts and separate the No. 3 parking brake cable assembly from the backing plate.



  1. Remove the 2 bolts, 4 nuts, clamp, and the No. 3 parking brake cable assembly.


    C172116



15. REMOVE NO. 1 PARKING BRAKE CABLE SUPPORT BRACKET


  1. Remove the No. 1 parking brake cable support bracket from the No. 3 parking brake cable assembly.


    C172118



16. REMOVE CABLE SUPPORT BRACKET


  1. Remove the cable support bracket from the No. 3 parking brake cable assembly.


    C172119



17. REMOVE NO. 2 PARKING BRAKE CABLE ASSEMBLY


    C168094
  1. Remove the 2 bolts and separate the No. 2 parking brake cable assembly from the backing plate.



  1. Remove the 3 bolts, 3 nuts, and the No. 2 parking brake cable assembly.


    C172117



18. REMOVE PARKING BRAKE CABLE SUPPORT BRACKET


  1. Remove the parking brake cable support bracket from the No. 2 parking brake cable assembly.


    C172120



19. REMOVE CABLE SUPPORT BRACKET


  1. Remove the cable support bracket from the No. 2 parking brake cable assembly.


    C172121