Home › HYBRID SYSTEM · P310 › HYBRID BATTERY CONTROL › BATTERY BLOWER RELAY

BATTERY BLOWER RELAY > INSPECTION

for Preparation Click here



1. INSPECT BATTERY BLOWER RELAY


    B016200
  1. Measure the resistance between the terminals of the relay.

    Standard resistance:
    Tester Connection
    Specified Condition
    3 - 5
    10 kΩ or higher
    3 - 5
    Below 1 Ω
    (Apply battery voltage to terminals 1 and 2)

    If the value is not as specified, replace the battery blower relay.