Home › HEATER & AIR CONDITIONING SYSTEM › AIR CONDITIONING › BLOWER UNIT

BLOWER UNIT > REASSEMBLY

for Preparation Click here



1. INSTALL FRONT BLOWER MOTOR SUB-ASSEMBLY


    E151035
  1. Install the front blower motor sub-assembly with the 3 screws.



2. INSTALL AIR INLET CONTROL SERVO MOTOR SUB-ASSEMBLY


    E151034
  1. Install the air inlet control servo motor sub-assembly with the 3 screws.



3. INSTALL CLEAN AIR FILTER


    E151032
  1. Install the clean air filter as shown in the illustration.



4. INSTALL AIR FILTER CASE


    E151031
  1. Engage the 2 claws to install the air filter case.



5. INSTALL NO. 1 AIR DUCT SUB-ASSEMBLY


    E151030
  1. Engage the 4 claws to install the air duct sub-assembly.