Home › BODY ELECTRICAL › AUDIO / VISUAL › REAR SEAT ENTERTAINMENT SYSTEM

REAR SEAT ENTERTAINMENT SYSTEM > TERMINALS OF ECU

for Preparation Click here



CHECK TELEVISION DISPLAY ASSEMBLY

E119739E09

  1. Disconnect the television display assembly connector.

  2. Measure the voltage of the wire harness side connector.

    Terminal No. (Symbols)
    Wiring Color
    Terminal Description
    Condition
    Specified Condition
    Q13-12 (GND6) - Body ground
    W-B - Body ground
    Ground
    Always
    Below 1 V
    Q13-15 (ACC4) - Q13-12 (GND6)
    R - W-B
    Power source (ACC)
    Power switch on (ACC)
    11 to 14 V
    Q13-16 (+B2) - Q13-12 (GND6)
    B - W-B
    Battery
    Always
    11 to 14 V
    If the result is not as specified, there may be a malfunction on the wire harness side.

  3. Reconnect the television display assembly connector.

  4. Measure the voltage of the connectors.

    Terminal No. (Symbols)
    Wiring Color
    Terminal Description
    Condition
    Specified Condition
    Q13-6 (NTS4) - Q13-12 (GND6)
    P - W-B
    Display signal
    External device system is playing (when video terminal is used)
    Pulse generation
    Q13-7 (AUXR) - Q13-12 (GND6)
    G - W-B
    Sound signal
    External device system is playing (when video terminal is used)
    Waveform synchronized with sound is output
    Q13-8 (AUXL) - Q13-12 (GND6)
    R - W-B
    Sound signal
    External device system is playing (when video terminal is used)
    Waveform synchronized with sound is output
    Q13-13 (TX-) - Q13-14 (TX+)
    BR - Y
    AVC-LAN communication signal
    Power switch on (ACC)
    2 to 3 V
    Q13-22 (SGN5) - Q13-12 (GND6)
    L - W-B
    Ground
    Always
    Below 1 V
    Q13-23 (SG7) - Q13-12 (GND6)
    Shielded - W-B
    Shield ground
    Always
    Below 1 V
    Q13-24 (OPEN) - Q13-12 (GND6)
    O - W-B
    VTR terminal detection signal
    Always
    Below 1 V
    Q13-25 (SGN2) - Q13-12 (GND6)
    Shielded - W-B
    Shield ground
    Always
    Below 1 V
    Q13-26 (LMUT) - Q13-12 (GND6)
    B - W-B
    Mute signal
    RSE system is playing
    Above 3.5 V
    Q13-26 (LMUT) - Q13-12 (GND6)
    B - W-B
    Mute signal
    RSE system is changing mode
    Below 1 V
    Q13-27 (SG1) - Q13-12 (GND6)
    Shielded - W-B
    Shield ground
    Always
    Below 1 V
    Q13-28 (R+) - Q13-12 (GND6)
    BR - W-B
    RSE sound signal
    RSE system is playing
    Waveform synchronized with sound is output
    Q13-29 (R-) - Q13-12 (GND6)
    SB - W-B
    RSE sound signal
    RSE system is playing
    Waveform synchronized with sound is output
    Q13-30 (L+) - Q13-12 (GND6)
    LG - W-B
    RSE sound signal
    RSE system is playing
    Waveform synchronized with sound is output
    Q13-31 (L-) - Q13-12 (GND6)
    P - W-B
    RSE sound signal
    RSE system is playing
    Waveform synchronized with sound is output
    If the result is not as specified, the television display assembly may have a malfunction.


CHECK RADIO RECEIVER (Click here)

CHECK NAVIGATION RECEIVER ASSEMBLY (Click here)