Home › BODY ELECTRICAL › METER › METER / GAUGE SYSTEM

METER / GAUGE SYSTEM > DTC CHECK / CLEAR

for Preparation Click here



CHECK DTC
  1. Connect Techstream to the DLC3.

  2. Turn the power switch on (READY) and turn Techstream on.

  3. Enter the following menus: Body Electrical / Trouble Codes.

  4. Check for DTCs.


CLEAR DTC
  1. Connect Techstream to the DLC3.

  2. Turn the power switch on (READY) and turn Techstream on.

  3. Enter the following menus: Body Electrical / Trouble Codes.

  4. Clear DTCs.