Home › BODY › ENGINE HOOD / DOOR › POWER BACK DOOR TOUCH SENSOR

POWER BACK DOOR TOUCH SENSOR > INSPECTION

for Preparation Click here



1. INSPECT POWER BACK DOOR TOUCH SENSOR


B165213E01
  1. Measure the resistance according to the value(s) in the table below.

    Standard resistance:
    Tester Connection
    Condition
    Specified Condition
    1 - 2
    Not pressed
    Approx. 1 kΩ
    1 - 2
    Pressed
    Below 100 Ω

    If the result is not as specified, replace the sensor.