Home › BODY › ENGINE HOOD / DOOR › POWER BACK DOOR CLOSER SWITCH

POWER BACK DOOR CLOSER SWITCH > INSPECTION

for Preparation Click here



1. INSPECT POWER BACK DOOR CLOSER SWITCH


B165201E02
  1. Measure the resistance according to the value(s) in the table below.

    Standard resistance:
    Tester Connection
    Switch Condition
    Specified Condition
    1 - 2
    Pushed (ON)
    Below 1 Ω
    1 - 2
    Free (OFF)
    10 kΩ or higher

    If the result is not as specified, replace the switch.