Home › BODY › ENGINE HOOD / DOOR › FUEL LID OPENER SYSTEM

FUEL LID OPENER SYSTEM > TERMINALS OF ECU

for Preparation Click here



CHECK HYBRID VEHICLE CONTROL ECU


  1. Disconnect the B3 and B1 hybrid vehicle control ECU connectors.


    A103802E35

  2. Measure the resistance according to the value(s) in the table below.

    Terminal No. (Symbols)
    Wiring Color
    Terminal Description
    Condition
    Specified Condition
    B3-5 (E1) - Body ground
    W-B - Body ground
    Ground
    Always
    Below 1 Ω
    B1-28 (E2) - Body ground
    BR - Body ground
    Ground
    Always
    Below 1 Ω
    If the result is not as specified, there may be a malfunction on the wire harness side.

  3. Reconnect the B3 and B1 hybrid vehicle control ECU connectors.

  4. Measure the voltage according to the value(s) in the table below.

    Terminal No. (Symbols)
    Wiring Color
    Terminal Description
    Condition
    Specified Condition
    D36-11 (FUO) - B3-5 (E1)
    L - W-B
    Fuel lid motor signal
    Fuel lid motor operating
    Below 1 V
    D36-11 (FUO) - B3-5 (E1)
    L - W-B
    Fuel lid motor signal
    Fuel lid motor not operating
    10 to 14 V
    D35-15 (FUEL) - B3-5 (E1)
    P - W-B
    Fuel lid opener switch signal input
    Power switch on (IG), fuel lid opener switch is pressed
    Below 1 V
    D35-15 (FUEL) - B3-5 (E1)
    P - W-B
    Fuel lid opener switch signal input
    Power switch on (IG), fuel lid opener switch is not pressed
    10 to 14 V
    D35-13 (LIDO) - B3-5 (E1)
    G - W-B
    Fuel lid courtesy switch signal input
    Power switch on (IG), fuel lid is closed
    Below 1 V
    D35-13 (LIDO) - B3-5 (E1)
    G - W-B
    Fuel lid courtesy switch signal input
    Power switch on (IG), fuel lid is opened
    10 to 14 V
    D35-7 (LST1) - B3-5 (E1)
    R - W-B
    Multi-information display signal
    Multi-information display displays "PLEASE WAIT NOW OPENING"
    Below 1 V
    D35-6 (LST2) - B3-5 (E1)
    GR - W-B
    Multi-information display signal
    Multi-information display displays "PLEASE WAIT NOW OPENING"
    10 to 14 V
    D35-7 (LST1) - B3-5 (E1)
    R - W-B
    Multi-information display signal
    Multi-information display displays "REFUEL READY"
    10 to 14 V
    D35-6 (LST2) - B3-5 (E1)
    GR - W-B
    Multi-information display signal
    Multi-information display displays "REFUEL READY"
    10 to 14 V
    D35-7 (LST1) - B3-5 (E1)
    R - W-B
    Multi-information display signal
    Multi-information display displays "CLOSE FUEL LID"
    10 to 14 V
    D35-6 (LST2) - B3-5 (E1)
    GR - W-B
    Multi-information display signal
    Multi-information display displays "CLOSE FUEL LID"
    Below 1 V
    D35-7 (LST1) - B3-5 (E1)
    R - W-B
    Multi-information display signal
    Multi-information display displays "OFF"
    Below 1 V
    D35-6 (LST2) - B3-5 (E1)
    GR - W-B
    Multi-information display signal
    Multi-information display displays "OFF"
    Below 1 V
    D36-35 (PTNK) - B1-28 (E2)
    B - BR
    Fuel tank pressure sensor signal
    Power switch on (IG)
    0.5 to 4.5 V
    D36-12 (CCV2) - B3-5 (E1)
    GR - W-B
    Fuel vapor-containment valve signal
    Close valve ON (Open)
    Below 1 V
    D36-12 (CCV2) - B3-5 (E1)
    GR - W-B
    Fuel vapor-containment valve signal
    Close valve OFF (Close)
    10 to 14 V
    If the result is not as specified, the hybrid vehicle control ECU may have a malfunction.


CHECK COMBINATION METER


  1. Disconnect the E1 combination meter connector.


    B178877E01

  2. Measure the resistance and voltage according to the value(s) in the table below.

    Terminal No. (Symbols)
    Wiring Color
    Terminal Description
    Condition
    Specified Condition
    E1-20 (ES) - Body ground
    R - Body ground
    Ground
    Always
    Below 1 Ω
    E1-12 (FUWI) - E1-20 (ES)
    L - R
    Multi-information display signal
    Multi-information display displays "PLEASE WAIT NOW OPENING"
    Below 1 V
    E1-13 (FUCI) - E1-20 (ES)
    LG - R
    Multi-information display signal
    Multi-information display displays "PLEASE WAIT NOW OPENING"
    10 to 14 V
    E1-12 (FUWI) - E1-20 (ES)
    L - R
    Multi-information display signal
    Multi-information display displays "REFUEL READY"
    10 to 14 V
    E1-13 (FUCI) - E1-20 (ES)
    LG - R
    Multi-information display signal
    Multi-information display displays "REFUEL READY"
    10 to 14 V
    E1-12 (FUWI) - E1-20 (ES)
    L - R
    Multi-information display signal
    Multi-information display displays "CLOSE FUEL LID"
    10 to 14 V
    E1-13 (FUCI) - E1-20 (ES)
    LG - R
    Multi-information display signal
    Multi-information display displays "CLOSE FUEL LID"
    Below 1 V
    E1-12 (FUWI) - E1-20 (ES)
    L - R
    Multi-information display signal
    Multi-information display displays "OFF"
    Below 1 V
    E1-13 (FUCI) - E1-20 (ES)
    LG - R
    Multi-information display signal
    Multi-information display displays "OFF"
    Below 1 V
    If the result is not as specified, there may be a malfunction on the wire harness side.