Home › BODY › ENGINE HOOD / DOOR › FUEL LID OPENER SWITCH

FUEL LID OPENER SWITCH > INSPECTION

for Preparation Click here



1. INSPECT FUEL LID OPENER SWITCH


    B178863E01
  1. Check the fuel lid opener switch resistance.

    Standard resistance:
    Tester Connection
    Switch Position
    Specified Condition
    1 - 4
    Fuel lid opener switch is not pressed
    10 kΩ or higher
    1 - 4
    Fuel lid opener switch is pressed
    Below 1 Ω

    If the result is not as specified, replace the fuel lid opener switch.