Home › BRAKE › BRAKE CONTROL › BRAKE ACTUATOR

BRAKE ACTUATOR > DISPOSAL

for Preparation Click here



1. DISPOSE OF BRAKE BOOSTER PUMP


    C148059E01
  1. Using a drill, slowly make a hole at the circumference of the inner circle of the caution label and discharge the gas.

    CAUTION:
    Be sure to wear protective glasses as fragments may fly out due to pressure.

    HINT:
    1. Drill a hole approximately 10 mm (0.394 in.) deep.
    2. The gas is nitrogen which is colorless, odorless, and harmless.