BRAKE PEDAL > REASSEMBLY |
| 1. INSTALL BRAKE PEDAL PAD |
Install the brake pedal pad.
| 2. INSTALL BRAKE PEDAL BUSHING |
Apply lithium soap base glycol grease to 2 new brake pedal bushings.
Install the 2 brake pedal bushings to the brake pedal sub-assembly.
| 3. INSTALL BRAKE PEDAL SHAFT COLLAR |
Install the brake pedal shaft collar to the brake pedal sub-assembly.
| 4. INSTALL BRAKE PEDAL SUB-ASSEMBLY |
![]() |
Install the brake pedal sub-assembly to the brake pedal support sub-assembly with the bolt and nut as shown in the illustration.