Home › RESTRAINTS › SEAT BELT › FRONT PASSENGER SEAT BELT WARNING LIGHT

FRONT PASSENGER SEAT BELT WARNING LIGHT > INSPECTION

for Preparation Click here



1. INSPECT TELLTALE LIGHT ASSEMBLY


    B154244E08
  1. Check that the telltale light assembly (front passenger seat belt warning light) condition.

    1. Apply battery voltage to the connector according to the table below.

      OK:
      Tester Connection
      Condition
      Specified Condition
      Battery positive (+) → E19-3 (PBEW)
      Battery negative (-) → E19-5 (E)
      Seat belt is fastened
      Seat belt warning light comes on