Home › BODY ELECTRICAL › DOOR LOCK › WIRELESS DOOR LOCK BUZZER

WIRELESS DOOR LOCK BUZZER > INSPECTION

for Preparation Click here



1. INSPECT WIRELESS DOOR LOCK BUZZER


    B144393E10
  1. Measure the resistance according to the value(s) in the table below.

    HINT:
    The buzzer activation circuit is built into the ECU, not into the buzzer itself. When battery voltage is applied directly to the buzzer, the buzzer will not sound.

    Standard resistance:
    Tester Connection
    Condition
    Specified Condition
    A13-1 - A13-2
    Always
    950 to 1050 Ω

    If the result is not as specified, replace the wireless door lock buzzer.