Home › SERVICE SPECIFICATIONS › SERVICE SPECIFICATIONS › SUSPENSION

SUSPENSION > SERVICE DATA



Vehicle Height (unloaded vehicle):

Front A - B
Rear C - D
117.6 mm (4.63 in.)
31.7 mm (1.25 in.)


Wheel turning Angle (unloaded vehicle):


Inside Wheel
Outside Wheel Reference
Front wheel alignment
35°08' +/- 2°
(35.13° +/- 2°)
31°22' (31.37°)


Toe-in:


Item
Specified Condition
Front wheel alignment
Toe-in
(total)
C + D: 0°02' +/- 12' (0.04° +/- 0.2°)
B - A: 1.0 +/- 2 mm (0.04 +/- 0.08 in.)


Camber (unloaded vehicle):


Camber Inclination
Right-left difference
Front wheel alignment
-0°38' +/- 45'
(-0.63° +/- 0.75°)
45' (0.75°) or less


Caster (unloaded vehicle):


Caster Inclination
Right-left difference
Front wheel alignment
2°35' +/- 45'
(2.58° +/- 0.75°)
45' (0.75°) or less


Steering Axis Inclination (unloaded vehicle):


Steering Axis Inclination
Right-left difference
Front wheel alignment
11°00' +/- 45'
(11.00° +/- 0.75°)
45' (0.75°) or less


Toe-in:


Item
Specified Condition
Rear wheel alignment
Toe-in
(total)
C + D: 0°08' +/- 0°12' (0.14° +/- 0.2°)
B - A: 3.5 +/- 2.0 mm (0.14 +/- 0.08 in.)


Camber:


Specified Condition
Right-left difference
Rear wheel alignment
-0°33' +/- 45' (- 0.55° +/- 0.75°)
45' (0.75°) or less


Turning torque:

Turning torque
Front lower ball joint turning torque
0.7 to 4.5 N*m (7 to 46 kgf*cm, 6.2 to 40 in.*lbf)
Front stabilizer link ball joint turning torque
0.05 to 1.96 N*m (0.5 to 20 kgf*cm, 0.4 to 17 in.*lbf)
Rear stabilizer link ball joint turning torque
1.0 N*m (10 kgf*cm, 8.9 in.*lbf) or less