Home › STEERING › STEERING COLUMN › STEERING WHEEL

STEERING WHEEL > DISASSEMBLY

for Preparation Click here



1. REMOVE CRUISE CONTROL MAIN SWITCH


    E150160
  1. Remove the 2 screws.

  1. Disconnect the connector.



    E150161
  1. Remove the cruise control main switch as shown in the illustration.



2. REMOVE STEERING PAD SWITCH ASSEMBLY


    E150585
  1. Disconnect the pad switch connector from the spiral cable.

  1. Remove the screw.

  1. Disengage the 2 pins and remove the steering pad switch.



    E150586
  1. Remove the screw.

  1. Disengage the 2 pins and remove the steering pad switch assembly.



3. REMOVE LOWER STEERING WHEEL BOSS COVER


    C165712
  1. Remove the 2 screws.



    C165713
  1. Disengage the 4 claws to remove the lower steering wheel boss cover from the steering wheel sub-assembly.



4. REMOVE STEERING PAD ATTACHING SCREW


    C165714
  1. Remove the 2 steering pad attaching screws from the lower steering wheel boss cover.