Home › STEERING › STEERING COLUMN › STEERING WHEEL

STEERING WHEEL > REASSEMBLY

for Preparation Click here



1. INSTALL STEERING PAD ATTACHING SCREW


    C165714
  1. Install the 2 steering pad attaching screws to the lower steering wheel boss cover.



2. INSTALL LOWER STEERING WHEEL BOSS COVER


    C165713
  1. Engage the 4 claws to install the lower steering wheel boss cover to the steering wheel sub-assembly.



    C165712
  1. Install the 2 screws.



3. INSTALL STEERING PAD SWITCH ASSEMBLY


    E150586
  1. Engage the 2 pins and install the steering pad switch.

  1. Install the screw.

    Torque:
    2.4 N*m{ 24 kgf*cm , 21 in.*lbf }



    E150585
  1. Engage the 2 pins and install the steering pad switch assembly.

  1. Install the screw.

    Torque:
    2.4 N*m{ 24 kgf*cm , 21 in.*lbf }

  1. Connect the pad switch connector to the spiral cable.



4. INSTALL CRUISE CONTROL MAIN SWITCH


    E150162
  1. Install the cruise control main switch as shown in the illustration.

  1. Connect the connector.



    E150160
  1. Install the 2 screws.

    Torque:
    2.4 N*m{ 25 kgf*cm , 21 in.*lbf }