Home › BODY › EXTERIOR › FRONT BUMPER

FRONT BUMPER > DISASSEMBLY

for Preparation Click here



1. REMOVE FOG LIGHT ASSEMBLY LH (w/ Fog Light)


    E150050
  1. Remove the 2 screws.

  1. Disengage the guide and remove the fog light assembly.



2. REMOVE FOG LIGHT ASSEMBLY RH (w/ Fog Light)

HINT:
Use the same procedure for the RH side and LH side.



3. REMOVE FOG LIGHT COVER LH


    B181115
  1. Disengage the 6 claws and remove the fog light cover LH.



4. REMOVE FOG LIGHT COVER RH

HINT:
Use the same procedure for the RH side and LH side.



5. REMOVE FRONT BUMPER HOLE COVER LH


    B172766
  1. Disengage the 2 claws and remove the hole cover LH.



6. REMOVE FRONT BUMPER HOLE COVER RH

HINT:
Use the same procedure for the RH side and LH side.



7. REMOVE FRONT BUMPER ENERGY ABSORBER


    B172767
  1. Disengage the 2 guides and remove the front bumper energy absorber.



8. REMOVE FRONT BUMPER REINFORCEMENT


    B172768
  1. Remove the 6 bolts and front bumper reinforcement.



9. REMOVE FRONT BUMPER STAY LH


    B172769
  1. Remove the bolt and screw.

  1. Disengage the 2 claws and remove the front bumper stay LH.



10. REMOVE FRONT BUMPER STAY RH

HINT:
Use the same procedures for the RH side and LH side.