Home › BODY › EXTERIOR › REAR BUMPER

REAR BUMPER > DISASSEMBLY

for Preparation Click here



1. REMOVE REFLEX REFLECTOR ASSEMBLY LH


    B172723
  1. Remove the nut and reflex reflector assembly LH.



2. REMOVE REFLEX REFLECTOR ASSEMBLY RH

HINT:
Use the same procedure for the RH side and LH side.



3. REMOVE LOWER REAR BUMPER COVER
  1. Remove the 2 clips.



  1. Disengage the 10 claws and 2 guides, and remove the lower rear bumper cover.


    B172724



4. REMOVE REAR BUMPER ENERGY ABSORBER


    B172725
  1. Disengage the 2 guides and remove the rear bumper energy absorber.



5. REMOVE REAR BUMPER BAR


    B172726
  1. Remove the rear bumper bar from the rear bumper energy absorber.



6. REMOVE REAR BUMPER PLATE LH


    B172727
  1. Disengage the 3 claws and remove the rear bumper plate LH.



7. REMOVE REAR BUMPER PLATE RH

HINT:
Use the same procedure for the RH side and LH side.



8. REMOVE REAR BUMPER REINFORCEMENT


    B172728
  1. Remove the 6 nuts and rear bumper reinforcement.



9. REMOVE REAR BUMPER SIDE RETAINER LH


    B172729
  1. Remove the screw.

  1. Disengage the 2 claws and remove the rear bumper side retainer LH.



10. REMOVE REAR BUMPER SIDE RETAINER RH

HINT:
Use the same procedures for the RH side and LH side.



11. REMOVE NO. 2 REAR BUMPER SIDE SUPPORT LH


    B172730
  1. Remove the 2 screws.

  1. Disengage the 3 claws and remove the No. 2 rear bumper side support LH.



12. REMOVE NO. 2 REAR BUMPER SIDE SUPPORT RH

HINT:
Use the same procedures for the RH side and LH side.



13. REMOVE NO. 1 REAR BUMPER SIDE SUPPORT


    B172731
  1. Disengage the 2 claws and remove the No. 1 rear bumper side support.

    HINT:
    Use the same procedure for the RH side and LH side.