Home › BODY › EXTERIOR › REAR BUMPER

REAR BUMPER > REASSEMBLY

for Preparation Click here



1. INSTALL NO. 1 REAR BUMPER SIDE SUPPORT


    B172731
  1. Engage the 2 claws and install a new No. 1 rear bumper side support.

    HINT:
    Use the same procedure for the RH side and LH side.



2. INSTALL NO. 2 REAR BUMPER SIDE SUPPORT LH


    B172730
  1. Engage the 3 claws and install a new No. 2 rear bumper side support LH.

  1. Install the 2 screws.

    Torque:
    3.0 N*m{ 31 kgf*cm , 27 in.*lbf }



3. INSTALL NO. 2 REAR BUMPER SIDE SUPPORT RH

HINT:
Use the same procedures for the RH side and LH side.



4. INSTALL REAR BUMPER SIDE RETAINER LH


    B172729
  1. Engage the 2 claws and install a new rear bumper side retainer LH.

  1. Install the screw.

    Torque:
    3.0 N*m{ 31 kgf*cm , 27 in.*lbf }



5. INSTALL REAR BUMPER SIDE RETAINER RH

HINT:
Use the same procedures for the RH side and LH side.



6. INSTALL REAR BUMPER REINFORCEMENT


    B172728
  1. Install the rear bumper reinforcement with the 6 nuts.

    Torque:
    64 N*m{ 653 kgf*cm , 47 ft.*lbf }



7. INSTALL REAR BUMPER PLATE LH


    B172727
  1. Engage the 3 claws and install the rear bumper plate LH.



8. INSTALL REAR BUMPER PLATE RH

HINT:
Use the same procedure for the RH side and LH side.



9. INSTALL REAR BUMPER BAR


    B172726
  1. Install the rear bumper bar on the rear bumper energy absorber.



10. INSTALL REAR BUMPER ENERGY ABSORBER


    B172725
  1. Engage the 2 guides and install the rear bumper energy absorber.



11. INSTALL LOWER REAR BUMPER COVER
  1. Engage the 10 claws and 2 guides, and install the lower rear bumper cover.



  1. Install the 2 clips.


    B172724



12. INSTALL REFLEX REFLECTOR ASSEMBLY LH


    B172723
  1. Install the reflex reflector assembly LH with the nut.



13. INSTALL REFLEX REFLECTOR ASSEMBLY RH

HINT:
Use the same procedure for the RH side and LH side.