Home › BODY ELECTRICAL › WIPER AND WASHER › REAR WIPER RUBBER

REAR WIPER RUBBER > INSTALLATION

for Preparation Click here



1. INSTALL REAR WIPER RUBBER


    E144307E03
  1. Install the rear wiper rubber backing plates as shown in the illustration.

    NOTICE:
    Install the backing plates facing the correct direction.

  1. Insert the wiper rubber from the front end of the wiper blade to the rear end through the second claw.



    B117902E03
  1. After pushing the wiper rubber through the rear end claw, allow it to stick out from the rear end stopper.



    B117903E01
  1. Slide the wiper rubber through the front end claw.



2. INSTALL REAR WIPER BLADE ASSEMBLY


    E150199
  1. Push the wiper blade straight toward the right side of the vehicle to install it to the wiper arm.

    NOTICE:
    Be careful not to damage the claw.



    E150155
  1. Connect the rear wiper head cap.