Home › BODY ELECTRICAL › WIPER AND WASHER › WIPER SWITCH

WIPER SWITCH > INSTALLATION

for Preparation Click here



1. INSTALL WINDSHIELD WIPER SWITCH ASSEMBLY


    E151096
  1. Engage the claw and install the windshield wiper switch assembly.

  1. Connect the 2 connectors.



2. INSTALL STEERING COLUMN COVER


    E151094
  1. Engage the claw and install the upper steering column cover.



    E151095
  1. Engage the 2 claws and install the lower steering column cover.



    E151101
  1. Turn the steering wheel assembly to the left and install the screw as shown in the illustration.

    Torque:
    2.0 N*m{ 20 kgf*cm , 18 in.*lbf }



    E151100
  1. Turn the steering wheel assembly to the right and install the screw as shown in the illustration.

    Torque:
    2.0 N*m{ 20 kgf*cm , 18 in.*lbf }