Home › BODY ELECTRICAL › WIPER AND WASHER › WASHER NOZZLE

WASHER NOZZLE > ADJUSTMENT

for Preparation Click here



1. REMOVE WASHER NOZZLE SUB-ASSEMBLY


    E147127E01
  1. Using a screwdriver, disengage the 2 claws and separate the washer nozzle sub-assembly as shown in the illustration.

    NOTICE:
    Be careful not to damage the windshield.

    HINT:
    Tape the screwdriver tip before use.



    E128831
  1. Remove the washer nozzle sub-assembly from the washer hose.

    NOTICE:
    Washer nozzles cannot be reused.



2. ADJUST WASHER NOZZLE SUB-ASSEMBLY


  1. Select a washer nozzle sub-assembly so that the washer fluid spray area is as specitied.


    E150188E01



3. INSTALL WASHER NOZZLE SUB-ASSEMBLY


    E128831
  1. Connect a new washer nozzle sub-assembly to the washer hose.



    B163611E01
  1. Engage the 2 claws and install the washer nozzle sub-assembly as shown in the illustration.