Home › RESTRAINTS › SEAT BELT › REAR CENTER SEAT OUTER BELT ASSEMBLY

REAR CENTER SEAT OUTER BELT ASSEMBLY > REMOVAL

for Preparation Click here



1. REMOVE REAR CENTER SEAT ASSEMBLY


2. REMOVE REAR SEAT HEADREST ASSEMBLY


    B180411
  1. Press the headrest support button and pull up the headrest to its highest position as shown in the illustration.



    B180415
  1. Insert a finger or screwdriver into the hole to release the lock. Pull the headrest up as shown in the illustration to remove it.



3. REMOVE REAR SEAT TRACK BRACKET COVER


    B173775
  1. Disengage the 8 claws and remove the 2 rear seat track bracket covers.



4. REMOVE REAR OUTER TRACK BRACKET COVER


    B173776
  1. Disengage the 4 claws and remove the rear outer track bracket cover.



5. REMOVE REAR INNER TRACK BRACKET COVER


    B181542
  1. Disengage the 5 claws and remove the rear inner track bracket cover.



6. REMOVE RECLINING HINGE COVER LH


    B181543
  1. Disengage the 2 clips and remove the reclining hinge cover LH.



7. REMOVE REAR SEAT LEG SIDE COVER


    B181544
  1. Disengage the 3 claws and remove the rear seat leg side cover.



8. REMOVE REAR NO. 1 SEAT LOCK CABLE ASSEMBLY (w/ Remote Folding Function)


  1. Pull down the adjuster's lock piece to release the lock as shown in the illustration.


    B180388E01



    B174594E01
  1. Using a screwdriver wrapped with protective tape, disengage the 2 claws as shown in the illustration.



  1. Lift up the seat track adjusting handle to the uppermost position and hold the handle in this position as shown in the illustration.


    B173770E01

  1. Using a screwdriver wrapped with protective tape, disconnect the rear No. 1 seat lock cable assembly as shown in the illustration.



  1. Using a screwdriver wrapped with protective tape, disconnect the rear seat reclining control cable as shown in the illustration.


    B180393E01

  1. Secure the rear seat reclining control cable with the carpet hole as shown in the illustration.



9. REMOVE REAR NO. 1 SEAT ASSEMBLY


    B173780
  1. Remove the 3 bolts on the rear side of the seat.



    B173778
  1. Remove the 2 bolts on the front side of the seat and the rear No. 1 seat assembly.

    NOTICE:
    Be careful not to damage the vehicle body.



10. REMOVE REAR SEAT RECLINING UPPER COVER


    B173783E01
  1. Using a screwdriver wrapped with protective tape, disengage the 3 claws and remove the rear seat reclining upper cover.



11. REMOVE NO. 1 RECLINING ADJUSTER RELEASE HANDLE


    B196364
  1. Remove the 3 screws and the No. 1 reclining adjuster release handle.



12. REMOVE REAR SEAT CUSHION MOULDING LH


    B196365
  1. Remove the screw.

  1. Disengage the 5 claws.

  1. Disengage the guide and remove the rear seat cushion moulding LH.



13. REMOVE SEAT ADJUSTER COVER CAP


    B173786E01
  1. Using a screwdriver wrapped with protective tape, disengage the 2 claws and remove the seat adjuster cover cap.



14. REMOVE REAR SEAT CUSHION MOULDING RH


    B173788
  1. Remove the screw.

  1. Disengage the 6 claws and remove the rear seat cushion moulding RH.



15. REMOVE REAR NO. 1 SEAT CUSHION COVER WITH PAD


    B180396
  1. Disengage the 2 hooks.



    B173795
  1. Disengage the 2 hooks.

  1. Remove the 2 hog rings.



    B196379
  1. Disengage the 3 buttons.



    B206101
  1. Disengage the 12 hooks.



    B173797
  1. Remove the 3 hog rings and the rear No. 1 seat cushion cover with pad.



16. REMOVE SEAT TRACK UPPER RAIL COVER


    B206104
  1. Remove the screw.

  1. Disengage the claw and remove the seat track upper rail cover.



17. REMOVE REAR SEAT RECLINING INNER COVER


    B206105
  1. Remove the screw.

  1. Disengage the guide and remove the rear seat reclining inner cover.



18. REMOVE NO. 1 SEAT ARMREST CAP


    B173800E01
  1. Using a screwdriver wrapped with protective tape, disengage the 2 claws and remove the No. 1 seat armrest cap.



19. REMOVE REAR SEAT ARMREST ASSEMBLY


    B173802
  1. Remove the bolt and the rear seat armrest assembly.



20. REMOVE TONNEAU COVER HOOK HOLDER


    B196386
  1. Remove the 2 screws and the 2 tonneau cover hook holders.



21. REMOVE REAR SEATBACK COVER


    B173805
  1. Disengage the 4 claws and remove the rear seatback cover.



22. REMOVE REAR SEAT LOCK STRIKER COVER


    B206106
  1. Using a screwdriver wrapped with protective tape, disengage the claw.

  1. Disengage the guide and remove the rear seat lock striker cover.



23. REMOVE REAR SEAT LOCK CONTROL LEVER SUB-ASSEMBLY


    B206107
  1. Remove the 2 screws.

  1. Disengage the guide.



  1. Disconnect the rear seat lock control cable and remove the rear seat lock control lever sub-assembly as shown in the illustration.


    B173808



24. DISCONNECT REAR CENTER SEAT OUTER BELT ASSEMBLY


    B170903
  1. Remove the bolt and disconnect the rear center seat outer belt assembly.



25. REMOVE REAR SEATBACK LOWER LOCK BEZEL


    B196390
  1. Remove the screw.

  1. Disengage the 4 claws and disconnect the rear center seat outer belt cover.



    B196391
  1. Disengage the snap and remove the rear seat track handle as shown in the illustration.



    B196393
  1. Remove the 2 screws and the rear seatback lower lock bezel.



26. REMOVE REAR SEATBACK LOCK ASSEMBLY


    B206108
  1. Remove the 2 bolts and the rear seatback lock assembly.



27. REMOVE REAR SEATBACK BOARD CARPET ASSEMBLY


    B206109
  1. Disengage the 19 claws as shown in the illustration.

  1. Disengage the 2 clips.

  1. Disengage the 2 guides and remove the rear seatback board carpet assembly.



28. REMOVE REAR NO. 1 SEAT HEADREST SUPPORT ASSEMBLY LH


    B196396
  1. Disengage the 2 claws and remove the rear No. 1 seat headrest support assembly LH.



29. REMOVE REAR NO. 1 SEAT HEADREST SUPPORT ASSEMBLY RH


    B196397
  1. Disengage the 2 claws and remove the rear No. 1 seat headrest support assembly RH.



30. REMOVE REAR NO. 1 SEATBACK COVER WITH PAD


    B173823
  1. Disengage the 2 hooks and the remove rear No. 1 seatback cover with pad.



31. REMOVE BELT SUPPORT PLATE


    B170939
  1. Disengage the 3 claws and remove the belt support plate.



32. REMOVE REAR CENTER SEAT OUTER BELT ASSEMBLY


    B170904
  1. Remove the bolt, nut, and the rear center seat outer belt assembly.