Home › SECURITIES › THEFT DETERRENT › ENGINE HOOD COURTESY SWITCH

ENGINE HOOD COURTESY SWITCH > REMOVAL



1. REMOVE COOL AIR INTAKE DUCT SEAL


    B181107
  1. Remove the 11 clips and cool air intake duct seal.



2. REMOVE RADIATOR GRILLE


    B181108E01
  1. Put protective tape around the radiator grille.



    B181109
  1. Remove the 2 bolts and 4 clips.



    B181110
  1. Disengage the 6 claws and 4 guides, and remove the radiator grille.



3. REMOVE HOOD LOCK ASSEMBLY


    B174191
  1. Disconnect the connector.



    B174192
  1. Remove the hood lock nut cap.



    B174193
  1. Remove the 3 bolts.



    B174194
  1. Disconnect the hood lock control cable and remove the hood lock assembly.