Home › BODY › INSTRUMENT PANEL › INSTRUMENT PANEL SAFETY PAD

INSTRUMENT PANEL SAFETY PAD > REASSEMBLY

for Preparation Click here



1. INSTALL FRONT PASSENGER AIRBAG ASSEMBLY


    C168042
  1. Engage the 5 hooks.



    C165105
  1. Install the front passenger airbag assembly with the 5 hooks on the instrument panel.



    C165104
  1. Install the 2 screws.



2. INSTALL COOLER SWITCH HOLE COVER (w/o Automatic Light Control System)


    B172998
  1. Engage the 2 claws and install the cooler switch hole cover.



3. INSTALL AUTOMATIC LIGHT CONTROL SENSOR (w/ Automatic Light Control System)


    E150082
  1. Engage the 2 claws and install the automatic light control sensor.

  1. Connect the connector.



4. INSTALL NO. 4 INSTRUMENT PANEL WIRE


    B168385
  1. Engage the 5 clamps.

  1. Connect the connector and install the No. 4 instrument panel wire.



5. INSTALL ANTENNA CORD SUB-ASSEMBLY


  1. Engage the 9 clamps and install the antenna cord sub-assembly.


    E150564



6. INSTALL NAVIGATION ANTENNA ASSEMBLY (w/ Navigation System)


    E150590
  1. Install the navigation antenna with the 2 screws.



    E150591
  1. Engage the 3 clamps and install the navigation antenna assembly.



7. INSTALL NO. 2 INSTRUMENT PANEL REGISTER ASSEMBLY


    B168384
  1. Install the No. 2 instrument panel register assembly with the 3 screws <E>.



8. INSTALL NO. 1 INSTRUMENT PANEL REGISTER ASSEMBLY


    B168383
  1. Install the No. 1 instrument panel register assembly with the 3 screws <E>.



9. INSTALL CENTER HEATER TO REGISTER SUB DUCT


    B168382
  1. Install the center heater to register sub duct with the 2 screws <E>.



10. INSTALL DEFROSTER NOZZLE ASSEMBLY


    B173016
  1. Install the defroster nozzle assembly with the 3 screws <E> and clip.



11. INSTALL SIDE NO. 2 DEFROSTER NOZZLE DUCT


    B168381
  1. Install the side No. 2 defroster nozzle duct with the screw <E>.



12. INSTALL SIDE NO. 1 DEFROSTER NOZZLE DUCT


    B168380
  1. Install the side No. 1 defroster nozzle duct with the screw <E>.



13. INSTALL NO. 4 HEATER TO REGISTER DUCT


    B168379
  1. Install the No. 4 heater to register duct with the 3 screws <E>.



14. INSTALL NO. 1 HEATER TO REGISTER DUCT


    B168378
  1. Install the No. 1 heater to register duct with the 3 screws <E>.