LICENSE PLATE LIGHT ASSEMBLY > INSTALLATION |
| 1. INSTALL LICENSE PLATE LIGHT ASSEMBLY |
![]() |
Engage the 2 guides as shown in the illustration.
Install the license plate light assembly with the 2 screws.
![]() |
Engage the clamp.
| 2. INSTALL BACK DOOR OUTSIDE GARNISH ASSEMBLY |
Install 2 new clips and 5 new gaskets on the back door outside garnish assembly.
![]() |
Engage the 2 clips and install the back door outside garnish assembly.
![]() |
Install the 5 nuts.
Connect each connector.
| 3. INSTALL BACK DOOR TRIM PANEL ASSEMBLY |
![]() |
Engage the 16 clips and install the back door trim panel assembly.
| 4. INSTALL ASSIST STRAP ASSEMBLY |
![]() |
Install the assist strap assembly with the bolt.
| 5. INSTALL ASSIST STRAP HOLE COVER |
![]() |
Engage the 2 guides and 2 claws, and install the assist strap hole cover.
| 6. INSTALL BACK DOOR LOCK COVER (for Glass Hatch Type) |
![]() |
Engage the 4 guides and 2 claws, and install the back door lock cover.
| 7. INSTALL BACK DOOR TRIM COVER LH (w/o Power Back Door) |
![]() |
Engage the 2 clips and 2 claws, and install the back door trim cover LH.
| 8. INSTALL BACK DOOR TRIM COVER LH (w/ Power Back Door) |
![]() |
Engage the 2 clips and 2 claws, and install the back door trim cover LH.
| 9. CONNECT POWER BACK DOOR ROD (w/ Power Back Door) |
![]() |
Install the back door stay plate and connect the power back door rod.
| 10. INSTALL BACK DOOR SERVICE HOLE COVER LH |
![]() |
Engage the 6 claws and install the back door service hole cover LH.
| 11. INSTALL BACK DOOR TRIM COVER RH |
![]() |
Engage the 2 clips and 2 claws, and install the back door trim cover RH.
| 12. INSTALL BACK WINDOW UPPER TRIM PANEL ASSEMBLY |
![]() |
Engage the 4 clips and 4 claws, and install the back window upper trim panel assembly.