ROOM LIGHT ASSEMBLY (for Center) > INSTALLATION |
| 1. REMOVE NO. 1 ROOM LIGHT ASSEMBLY (for Standard) |
![]() |
Engage the 4 claws and install the lens cover.
![]() |
Engage the 4 claws and install the room light switch base to the No. 1 room light assembly.
![]() |
Engage the 4 claws and install the No. 1 room light assembly.
| 2. REMOVE NO. 1 ROOM LIGHT ASSEMBLY (for Independent Type) |
![]() |
Engage the 4 claws and install the lens cover.
![]() |
Engage the 8 claws and install the room light switch base to the No. 1 room light assembly.
![]() |
Engage the 4 claws and install the No. 1 room light assembly.