Home › BODY ELECTRICAL › LIGHTING › ROOM LIGHT ASSEMBLY (for Center)

ROOM LIGHT ASSEMBLY (for Center) > REMOVAL

for Preparation Click here



1. REMOVE NO. 1 ROOM LIGHT ASSEMBLY (for Standard)


    B132140E02
  1. Using a screwdriver, disengage the 4 claws and remove the lens cover.

    HINT:
    Tape the screwdriver tip before use.



    B132142E01
  1. Using a screwdriver, disengage the 2 claws <A> as shown in the illustration.

    HINT:
    Tape the screwdriver tip before use.

  1. Disengage the 2 claws <B>.



    B153052
  1. Using a screwdriver, disengage the 4 claws and remove the No. 1 room light assembly.



2. REMOVE NO. 1 ROOM LIGHT ASSEMBLY (for Independent Type)


    B173252E01
  1. Using a screwdriver, disengage the 4 claws and remove the lens cover.

    HINT:
    Tape the screwdriver tip before use.



    B173254E01
  1. Using a screwdriver, disengage the 2 claws <A> as shown in the illustration.

    HINT:
    Tape the screwdriver tip before use.

  1. Disengage the 2 claws <B>.



    B173256
  1. Using a screwdriver, disengage the 8 claws and remove the No. 1 room light assembly.