Home › BODY ELECTRICAL › LIGHTING › ROOM LIGHT ASSEMBLY (for Rear)

ROOM LIGHT ASSEMBLY (for Rear) > REMOVAL

for Preparation Click here



1. REMOVE NO. 2 ROOM LIGHT ASSEMBLY


    B132140E02
  1. Using a screwdriver, disengage the 4 claws and remove the lens cover.

    HINT:
    Tape the screwdriver tip before use.



    B132142E01
  1. Using a screwdriver, disengage the 2 claws <A> as shown in the illustration.

    HINT:
    Tape the screwdriver tip before use.

  1. Disengage the 2 claws <B>.



    B153052
  1. Using a screwdriver, disengage the 4 claws and remove the No. 2 room light assembly.