REAR NO. 1 SEAT ASSEMBLY (for LH Side) > DISASSEMBLY |
| 1. REMOVE REAR SEAT RECLINING UPPER COVER |
![]() |
Using a screwdriver wrapped with protective tape, disengage the 3 claws and remove the rear seat reclining upper cover.
| 2. REMOVE NO. 1 RECLINING ADJUSTER RELEASE HANDLE |
![]() |
Remove the 3 screws and the No. 1 reclining adjuster release handle.
| 3. REMOVE REAR SEAT CUSHION MOULDING LH |
![]() |
Remove the screw.
Disengage the 5 claws.
Disengage the guide and remove the rear seat cushion moulding LH.
| 4. REMOVE SEAT ADJUSTER COVER CAP |
![]() |
Using a screwdriver wrapped with protective tape, disengage the 2 claws and remove the seat adjuster cover cap.
| 5. REMOVE REAR SEAT CUSHION MOULDING RH |
![]() |
Remove the screw.
Disengage the 6 claws and remove the rear seat cushion moulding RH.
| 6. REMOVE SEAT ADJUSTER COVER CAP |
![]() |
Using a screwdriver wrapped with protective tape, disengage the 2 claws and remove the seat adjuster cover cap.
| 7. REMOVE SEAT ADJUSTER COVER CAP |
![]() |
Using a screwdriver wrapped with protective tape, disengage the 2 claws and remove the seat adjuster cover cap.
| 8. REMOVE CENTER PROTECTOR COVER |
![]() |
Remove the screw.
Disengage the claw and guide.
![]() |
Remove the screw and disconnect the rear side seat band sub-assembly.
Remove the center protector cover.
| 9. REMOVE REAR SEAT NO. 2 LEG SIDE COVER |
![]() |
Disengage the 2 claws and remove the rear seat No. 2 leg side cover.
| 10. REMOVE NO. 2 SEAT LEG COVER |
![]() |
Remove the 5 screws and the No. 2 seat leg cover.
| 11. REMOVE REAR SIDE SEAT BAND SUB-ASSEMBLY |
![]() |
Remove the rear side seat band sub-assembly.
| 12. REMOVE REAR SEAT 3 POINT TYPE COVER ASSEMBLY |
![]() |
Disengage the 2 claws and remove the rear seat 3 point type cover assembly.
| 13. REMOVE REAR SEAT CUSHION UNDER COVER |
![]() |
Using a screwdriver wrapped with protective tape, disengage the claw.
Disengage the guide and remove the rear seat cushion under cover.
| 14. REMOVE NO. 2 REAR SEAT BEZEL COVER |
![]() |
Remove the screw.
Disengage the 2 guides and remove the No. 2 rear seat bezel cover as shown in the illustration.
| 15. REMOVE REAR SEAT LOCK ASSEMBLY |
![]() |
Remove the 2 bolts and the rear seat lock assembly.
| 16. REMOVE REAR SEAT FRONT CUSHION MOULDING |
![]() |
Remove the screw and the rear seat front cushion moulding.
| 17. REMOVE REAR NO. 1 SEAT CUSHION COVER WITH PAD |
![]() |
Disengage the 2 hooks.
![]() |
Disengage the 2 hooks.
Remove the 2 hog rings.
![]() |
Disengage the 3 buttons.
![]() |
Disengage the 12 hooks.
![]() |
Remove the 3 hog rings and the rear No. 1 seat cushion cover with pad.
| 18. REMOVE SEPARATE TYPE REAR NO. 1 SEAT CUSHION COVER |
![]() |
Remove the 11 hog rings and the separate type rear No. 1 seat cushion cover.
| 19. REMOVE NO. 1 REAR SEAT COVER (for LH Side) |
![]() |
Disengage the 4 hooks and remove the No. 1 rear seat cover.
| 20. REMOVE NO. 1 REAR SEAT COVER (for RH Side) |
![]() |
Disengage the 2 hooks and remove the No. 1 rear seat cover.
| 21. REMOVE NO. 1 REAR SEAT COVER (for Rear Side) |
![]() |
Disengage the 2 hooks and remove the No. 1 rear seat cover.
| 22. REMOVE REAR SEAT NO. 1 RECLINING COVER |
![]() |
Remove the screw.
Disengage the claw.
Disengage the 2 guides and remove the rear seat No. 1 reclining cover.
| 23. REMOVE RECLINING ADJUSTER INSIDE COVER LH |
![]() |
Disengage the guide and remove the reclining adjuster inside cover LH.
| 24. REMOVE SEAT TRACK UPPER RAIL COVER |
![]() |
Remove the screw.
Disengage the claw and remove the seat track upper rail cover.
| 25. REMOVE REAR SEAT RECLINING INNER COVER |
![]() |
Remove the screw.
Disengage the guide and remove the rear seat reclining inner cover.
| 26. REMOVE REAR NO. 1 SEAT INNER BELT ASSEMBLY |
![]() |
Remove the bolt and the rear No. 1 seat inner belt assembly.
| 27. REMOVE NO. 1 SEAT ARMREST CAP |
![]() |
Using a screwdriver wrapped with protective tape, disengage the 2 claws and remove the No. 1 seat armrest cap.
| 28. REMOVE REAR SEAT ARMREST ASSEMBLY |
![]() |
Remove the bolt and the rear seat armrest assembly.
| 29. REMOVE TONNEAU COVER HOOK HOLDER |
![]() |
Remove the 2 screws and the 2 tonneau cover hook holders.
| 30. REMOVE REAR SEATBACK COVER |
![]() |
Disengage the 4 claws and remove the rear seatback cover.
| 31. REMOVE REAR SEAT LOCK STRIKER COVER |
![]() |
Using a screwdriver wrapped with protective tape, disengage the claw.
Disengage the guide and remove the rear seat lock striker cover.
| 32. REMOVE REAR SEAT LOCK CONTROL LEVER SUB-ASSEMBLY |
![]() |
Remove the 2 screws.
Disengage the guide.
Disconnect the rear seat lock control cable and remove the rear seat lock control lever sub-assembly as shown in the illustration.

| 33. DISCONNECT REAR CENTER SEAT OUTER BELT ASSEMBLY |
![]() |
Remove the bolt and disconnect the rear center seat outer belt assembly.
| 34. REMOVE REAR SEATBACK LOWER LOCK BEZEL |
![]() |
Remove the screw.
Disengage the 4 claws and disconnect the rear center seat outer belt cover.
![]() |
Disengage the snap and remove the rear seat track handle as shown in the illustration.
![]() |
Remove the 2 screws and the rear seatback lower lock bezel.
| 35. REMOVE REAR SEATBACK LOCK ASSEMBLY |
![]() |
Remove the 2 bolts and the rear seatback lock assembly.
| 36. REMOVE REAR SEATBACK BOARD CARPET ASSEMBLY |
![]() |
Disengage the 19 claws as shown in the illustration.
Disengage the 2 clips.
Disengage the 2 guides and remove the rear seatback board carpet assembly.
| 37. REMOVE REAR NO. 1 SEAT HEADREST SUPPORT ASSEMBLY LH |
![]() |
Disengage the 2 claws and remove the rear No. 1 seat headrest support assembly LH.
| 38. REMOVE REAR NO. 1 SEAT HEADREST SUPPORT ASSEMBLY RH |
![]() |
Disengage the 2 claws and remove the rear No. 1 seat headrest support assembly RH.
| 39. REMOVE REAR NO. 1 SEATBACK COVER WITH PAD |
![]() |
Disengage the 2 hooks and the remove rear No. 1 seatback cover with pad.
| 40. REMOVE SEPARATE TYPE REAR NO. 1 SEATBACK COVER |
![]() |
Remove the 10 hog rings and the separate type rear No. 1 seatback cover.
| 41. REMOVE BELT SUPPORT PLATE |
![]() |
Disengage the 3 claws and remove the belt support plate.
| 42. REMOVE REAR CENTER SEAT OUTER BELT ASSEMBLY |
![]() |
Remove the bolt, nut, and the rear center seat outer belt assembly.
| 43. REMOVE REAR NO. 1 SEAT SHOULDER BELT COVER |
![]() |
Disengage the claw.
Disengage the guide and remove the rear No. 1 seat shoulder belt cover.
| 44. REMOVE REAR NO. 2 SEATBACK COVER |
![]() |
Remove the 2 screws.
Disengage the claw and remove the rear No. 2 seatback cover.
| 45. REMOVE REAR SEAT CUSHION SIDE COVER |
![]() |
Remove the 2 screws.
Disengage the claw and remove the rear seat cushion side cover.
| 46. REMOVE NO. 2 REAR SEAT COVER |
![]() |
Remove the No. 2 rear seat cover.
| 47. REMOVE NO. 1 REAR SEAT RECLINING CONTROL CABLE |
![]() |
Disengage the 6 control cable clamps and 2 clamps.
Remove the clamp and the No. 1 rear seat reclining control cable.
| 48. REMOVE NO. 2 REAR SEAT RECLINING CONTROL CABLE |
![]() |
Disengage the 4 cable camps and rear seat hook.
Disengage the rear seat hook.
Disengage the claw and remove the No. 2 rear seat reclining control cable.
| 49. REMOVE REAR SEAT HOOK |
![]() |
Disengage the claw and remove the rear seat hook from the No. 2 rear seat reclining control cable.
| 50. REMOVE REAR SEAT CUSHION SPRING ASSEMBLY |
![]() |
Using a T45 "TORX" socket, remove the 4 "TORX" bolts, 2 bushes and the rear seat cushion spring assembly.