Home › BODY › SEAT › REAR NO. 1 SEAT ASSEMBLY (for LH Side)

REAR NO. 1 SEAT ASSEMBLY (for LH Side) > REASSEMBLY

for Preparation Click here



1. INSTALL REAR SEAT CUSHION SPRING ASSEMBLY


    B206113
  1. Using a T45 "TORX" socket wrench, install the rear seat cushion spring assembly with the 4 bolts and 2 bushes.

    Torque:
    21 N*m{ 214 kgf*cm , 16 ft.*lbf }



2. INSTALL REAR SEAT HOOK


    B196403
  1. Engage the claw to install the rear seat hook.



3. INSTALL NO. 2 REAR SEAT RECLINING CONTROL CABLE


    B206112
  1. Engage the claw.

  1. Engage the rear seat hook.

  1. Engage the 4 cable clamps to install the No. 2 rear seat reclining control cable.



4. INSTALL NO. 1 REAR SEAT RECLINING CONTROL CABLE (w/ Remote Folding Function)


    B206111
  1. Install the clamp.

  1. Engage the 2 clamps.

  1. Engage the 6 cable clamps to install the No. 1 rear seat reclining control cable.



5. INSTALL NO. 2 REAR SEAT COVER


    B206110
  1. Install the No. 2 rear seat cover.



6. INSTALL REAR SEAT CUSHION SIDE COVER


    B173829
  1. Engage the claw.

  1. Install the rear seat cushion side cover with the 2 screws.



7. INSTALL REAR NO. 2 SEATBACK COVER


    B173828
  1. Engage the claw.

  1. Install the rear No. 2 seatback cover with the 2 screws.



8. INSTALL REAR NO. 1 SEAT SHOULDER BELT COVER


    B196398
  1. Engage the guide.

  1. Engage the claw to install the rear No. 1 seat shoulder belt cover.



9. INSTALL REAR CENTER SEAT OUTER BELT ASSEMBLY


    B170904
  1. Install the rear center seat outer belt assembly with the bolt and nut.

    Torque:
    Bolt:
    7.5 N*m{ 77 kgf*cm , 66 in.*lbf }
    Nut:
    42 N*m{ 428 kgf*cm , 31 ft.*lbf }



10. INSTALL BELT SUPPORT PLATE


    B170939
  1. Engage the 3 claws to install the belt support plate.



11. INSTALL SEPARATE TYPE REAR NO. 1 SEATBACK COVER


    B173827E01
  1. Using hog ring pliers, install the separate type rear No. 1 seatback cover with 10 new hog rings.

    NOTICE:
    1. Be careful not to damage the cover.
    2. When installing the hog rings, take care to minimize wrinkles as much as possible.



12. INSTALL REAR NO. 1 SEATBACK COVER WITH PAD


    B173823
  1. Engage the hooks to install the rear No. 1 seatback cover with pad.



13. INSTALL REAR NO. 1 SEAT HEADREST SUPPORT ASSEMBLY RH


    B196397
  1. Engage the 2 claws to install the rear No. 1 seat headrest support assembly RH.



14. INSTALL REAR NO. 1 SEAT HEADREST SUPPORT ASSEMBLY LH


    B196396
  1. Engage the 2 claws to install the rear No. 1 seat headrest support assembly LH.



15. INSTALL REAR SEATBACK BOARD CARPET ASSEMBLY


    B206116
  1. Engage 2 guides.

  1. Engage the 2 clips.

  1. Engage the 19 claws to install the rear seatback board carpet assembly as shown in the illustration.



16. INSTALL REAR SEATBACK LOCK ASSEMBLY


    B206108
  1. Install the rear seatback lock assembly with the 2 bolts.

    Torque:
    21 N*m{ 214 kgf*cm , 16 ft.*lbf }



17. INSTALL REAR SEATBACK LOWER LOCK BEZEL


    B196393
  1. Install the rear seatback lower lock bezel with the 2 screws.



    B196392
  1. Engage the snap to install the rear seat track handle as shown in the illustration.



    B196390
  1. Engage the 4 claws.

  1. Install the rear center seat outer belt cover with the screw.



18. CONNECT REAR CENTER SEAT OUTER BELT ASSEMBLY


    B170903
  1. Connect the rear center seat outer belt with the bolt.

    Torque:
    42 N*m{ 428 kgf*cm , 31 ft.*lbf }



19. INSTALL REAR SEAT LOCK CONTROL LEVER SUB-ASSEMBLY


  1. Connect the rear seat lock control cable as shown in the illustration.


    B173809



    B206107
  1. Engage the guide.

  1. Install the rear seat lock control lever sub-assembly with the 2 screws.



20. INSTALL REAR SEAT LOCK STRIKER COVER


    B206117
  1. Engage the guide.

  1. Engage the claw to install the rear seat lock striker cover.



21. INSTALL REAR SEATBACK COVER


    B173805
  1. Engage the 4 claws to install the rear seatback cover.



22. INSTALL TONNEAU COVER HOOK HOLDER


    B196386
  1. Install the 2 tonneau cover hook holders with the 2 screws.



23. INSTALL REAR SEAT ARMREST ASSEMBLY


    B173802
  1. Install the rear seat armrest assembly with the bolt.

    Torque:
    33 N*m{ 337 kgf*cm , 24 ft.*lbf }



24. INSTALL NO. 1 SEAT ARMREST CAP


    B173801
  1. Engage the 2 claws to install the No. 1 seat armrest cap.



25. INSTALL REAR NO. 1 SEAT INNER BELT ASSEMBLY


    B170974
  1. Install the rear No. 1 seat inner belt assembly with the bolt.

    Torque:
    42 N*m{ 428 kgf*cm , 31 ft.*lbf }



26. INSTALL REAR SEAT RECLINING INNER COVER


    B206105
  1. Engage the guide.

  1. Install the rear seat reclining inner cover with the screw.



27. INSTALL SEAT TRACK UPPER RAIL COVER


    B206104
  1. Engage the claw.

  1. Install the seat track upper rail cover with the screw.



28. INSTALL RECLINING ADJUSTER INSIDE COVER LH


    B206150
  1. Engage the guide to install the reclining adjuster inside cover LH.



29. INSTALL REAR SEAT NO. 1 RECLINING COVER


    B206149
  1. Engage the 2 guides.

  1. Engage the claw.

  1. Install the rear seat No. 1 reclining cover with the screw.



30. INSTALL NO. 1 REAR SEAT COVER (for Rear Side)


    B196382
  1. Engage the 2 hooks to install the No. 1 rear seat cover.



31. INSTALL NO. 1 REAR SEAT COVER (for RH Side)


    B206103
  1. Engage the 2 hooks to install the No. 1 rear seat cover.



32. INSTALL NO. 1 REAR SEAT COVER (for LH Side)


    B206102
  1. Engage the 4 hooks to install the No. 1 rear seat cover.



33. INSTALL SEPARATE TYPE REAR NO. 1 SEAT CUSHION COVER


    B173799E01
  1. Using hog ring pliers, install the separate type rear No. 1 seat cushion cover with 11 new hog rings.

    NOTICE:
    1. Be careful not to damage the cover.
    2. When installing the hog rings, take care to minimize wrinkles as much as possible.



34. INSTALL REAR NO. 1 SEAT CUSHION COVER WITH PAD


    B173833E01
  1. Using hog ring pliers, install 3 new hog rings.

    NOTICE:
    1. Be careful not to damage the cover.
    2. When installing the hog rings, take care to minimize wrinkles as much as possible.



    B206101
  1. Engage the 12 hooks.



    B196379
  1. Engage the 3 buttons.



    B173832E01
  1. Using hog ring pliers, install 2 new hog rings.

    NOTICE:
    1. Be careful not to damage the cover.
    2. When installing the hog rings, take care to minimize wrinkles as much as possible.

  1. Install the 2 hooks.



    B180396
  1. Engage the 2 hooks to install the rear No. 1 seat cushion cover with pad.



35. INSTALL REAR SEAT FRONT CUSHION MOULDING


    B196378
  1. Install the rear seat front cushion moulding with the screw.



36. INSTALL REAR SEAT LOCK ASSEMBLY


    B196377
  1. Install the rear seat lock assembly with the 2 bolts.

    Torque:
    21 N*m{ 214 kgf*cm , 16 ft.*lbf }



37. INSTALL NO. 2 REAR SEAT BEZEL COVER


    B173793
  1. Temporarily install the No. 2 rear seat bezel cover as shown in the illustration.

  1. Engage the 2 guides.

  1. Install the rear seat bezel cover with the screw.



38. INSTALL REAR SEAT CUSHION UNDER COVER


    B173791
  1. Engage the guide.

  1. Engage the claw to install the rear seat cushion under cover.



39. INSTALL REAR SEAT 3 POINT TYPE COVER ASSEMBLY


    B196376
  1. Engage the 2 claws to install the rear seat 3 point type cover assembly.



40. INSTALL REAR SIDE SEAT BAND SUB-ASSEMBLY


    B196374
  1. Install the rear side seat band sub-assembly.



41. INSTALL NO. 2 SEAT LEG COVER


    B196373
  1. Install the No. 2 seat leg cover with the 5 screws.



42. INSTALL REAR SEAT NO. 2 LEG SIDE COVER


    B206100
  1. Engage the 2 claws to install the rear seat No. 2 leg side cover.



43. INSTALL CENTER PROTECTOR COVER


    B196370
  1. Temporarily install the center protector cover.

  1. install the rear side seat band sub-assembly with the screw.



    B196369
  1. Engage the claw and guide.

  1. Install the center protector cover with the screw.



44. INSTALL SEAT ADJUSTER COVER CAP


    B196368
  1. Engage the 2 claws to install the seat adjuster cover cap.



45. INSTALL SEAT ADJUSTER COVER CAP


    B196372
  1. Engage the 2 claws to install the seat adjuster cover cap.



46. INSTALL REAR SEAT CUSHION MOULDING RH


    B173788
  1. Engage the 6 claws.

  1. Install the rear seat cushion moulding RH with the screw.



47. INSTALL SEAT ADJUSTER COVER CAP


    B173787
  1. Engage the 2 claws to install the seat adjuster cover cap.



48. INSTALL REAR SEAT CUSHION MOULDING LH


    B196365
  1. Engage the guide.

  1. Engage the 5 claws.

  1. Install the rear seat cushion moulding LH with the screw.



49. INSTALL NO. 1 RECLINING ADJUSTER RELEASE HANDLE


    B196364
  1. Install the No. 1 reclining adjuster release handle with the 3 screws.



50. INSTALL REAR SEAT RECLINING UPPER COVER


    B173784
  1. Engage the 3 claws to install the rear seat reclining upper cover.