REAR NO. 2 SEAT ASSEMBLY > REMOVAL |
| 1. REMOVE DECK BOARD ASSEMBLY |
![]() |
Remove the deck board assembly.
| 2. REMOVE NO. 3 DECK BOARD SUB-ASSEMBLY |
![]() |
Disengage the 2 guides and remove the No. 3 deck board sub-assembly.
| 3. REMOVE NO. 2 DECK BOARD SUB-ASSEMBLY |
![]() |
Disengage the 2 guides and remove the No. 2 deck board sub-assembly.
| 4. REMOVE TONNEAU COVER ASSEMBLY (w/ Tonneau Cover) |
| 5. REMOVE REAR SEAT SIDE COVER LH |
![]() |
Disengage the 2 clips and remove the rear seat side cover LH.
| 6. REMOVE DECK SIDE TRIM BOX LH |
![]() |
Remove the 2 deck side trim clips and clip.
Remove the deck side trim box LH as shown in the illustration.

| 7. REMOVE REAR SEAT SIDE COVER RH |
![]() |
Disengage the 2 clips and remove the rear seat side cover RH.
| 8. REMOVE JACK CARRIER SUPPORT |
| 9. REMOVE JACK CARRIER CUSHION |
![]() |
Remove the jack carrier cushion.
| 10. REMOVE JACK ASSEMBLY |
![]() |
Remove the jack assembly.
| 11. REMOVE JACK CARRIER ASSEMBLY |
![]() |
Using a screwdriver, disengage the 3 claws and remove the jack carrier assembly.
| 12. REMOVE DECK SIDE TRIM BOX RH |
![]() |
Remove the 2 deck side trim clips and clip.
Remove the deck side trim box RH as shown in the illustration.

| 13. REMOVE REAR MAT |
![]() |
Remove the rear mat.
| 14. REMOVE DECK FLOOR BOARD ASSEMBLY |
![]() |
Disengage the 3 claws.
Remove the 2 nuts and the deck floor board assembly.
| 15. REMOVE REAR NO. 2 SEAT INNER BELT ASSEMBLY |
![]() |
Remove the bolt and rear No. 2 seat inner belt assembly.
| 16. DISCONNECT REAR SEAT LAP TYPE BELT ASSEMBLY LH |
![]() |
Remove the bolt and disconnect the rear seat lap type belt assembly LH.
| 17. DISCONNECT REAR SEAT LAP TYPE BELT ASSEMBLY RH |
| 18. REMOVE REAR NO. 2 SEAT ASSEMBLY |
![]() |
Remove the 4 bolts and the rear No. 2 seat assembly.