Home › BODY › SEAT › REAR NO. 2 SEAT ASSEMBLY

REAR NO. 2 SEAT ASSEMBLY > DISASSEMBLY

for Preparation Click here



1. REMOVE RECLINING COVER PROTECTOR LH


    B173834
  1. Remove the 2 screws and the reclining cover protector LH.



2. REMOVE NO. 2 SEAT HINGE COVER LH


    B173835
  1. Remove the 2 screws and the No. 2 seat hinge cover LH.



3. REMOVE RECLINING COVER PROTECTOR RH


    B173836
  1. Remove the 2 screws and the reclining cover protector RH.



4. REMOVE NO. 2 SEAT HINGE COVER RH


    B173837
  1. Remove the 2 screws and the No. 2 seat hinge cover RH.



5. REMOVE REAR NO. 2 SEAT CUSHION COVER WITH PAD


  1. Disengage the 13 hooks.


    B206728



  1. Remove the 4 hog rings and the rear No. 2 seat cushion cover with pad.


    B206729



6. REMOVE REAR NO. 2 SEAT CUSHION COVER SUB-ASSEMBLY


  1. Remove the 14 hog rings and the rear No. 2 seat cushion cover sub-assembly.


    B173839



7. REMOVE NO. 1 REAR SIDE SEAT BAND SUB-ASSEMBLY


    B205722E01
  1. Remove the 2 clips.

  1. Separate the fastener and the rear side seat band sub-assembly.



8. REMOVE REAR SEAT LOCK STRIKER COVER


    B173841E01
  1. Using a screwdriver wrapped with protective tape, disengage the claw.

  1. Disengage the 2 guides and remove the rear seat lock striker cover.



9. REMOVE REAR NO. 2 SEAT HANDLE


    B173843
  1. Remove the 2 screws.



    B205726
  1. Remove the clamp.



  1. Disconnect the 2 cable clamps and remove the rear No. 2 seat handle as shown in the illustration.


    B173844



10. REMOVE NO. 2 SEATBACK BOARD SUB-ASSEMBLY


  1. Disengage the 7 clips.


    B205727

  1. Disengage the 3 hooks and remove the No. 2 seatback board sub-assembly.



11. REMOVE NO. 1 REAR SEAT COVER BEZEL


    B205728
  1. Remove the 2 screws.

  1. Separate the hook and the No. 1 rear side seat band sub-assembly with No. 1 rear seat cover bezel.



    B205729
  1. Remove the No. 1 rear seat cover bezel.



12. REMOVE REAR NO. 2 SEATBACK COVER WITH PAD


  1. Remove the 4 hog rings.


    B205731

  1. Disengage the 15 hooks.



    B206723
  1. Disengage the 16 clips and remove the rear No. 2 seatback cover with pad.



13. REMOVE REAR NO. 2 SEATBACK COVER SUB-ASSEMBLY


  1. Remove the 18 hog rings and the rear No. 2 seatback cover sub-assembly.


    B174468



14. REMOVE NO. 2 REAR SEAT RECLINING COVER LH


    B174470
  1. Remove the screw.

  1. Disengage the guide and remove the No. 2 rear seat reclining cover LH.



15. REMOVE NO. 2 REAR SEAT RECLINING COVER RH


    B174471
  1. Remove the screw.

  1. Disengage the guide and remove the No. 2 rear seat reclining cover RH.



16. REMOVE REAR NO. 2 SEAT HEADREST ASSEMBLY LH


    B205735
  1. Remove the 2 screws and the rear No. 2 seat headrest cover LH.



    B205737
  1. Disconnect the 2 cable clamps.

  1. Remove the 3 nuts and the rear No. 2 seat headrest assembly LH.



17. REMOVE REAR NO. 2 SEAT HEADREST ASSEMBLY RH


    B205734
  1. Remove the 2 screws and the rear No. 2 seat headrest cover RH.



    B205736
  1. Disconnect the 2 cable clamps.

  1. Remove the 3 nuts and the rear No. 2 seat headrest assembly RH.



18. REMOVE REAR SEATBACK EDGE PROTECTOR


    B205738
  1. Disengage the 8 claws and remove the 4 rear seatback edge protectors.



19. REMOVE NO. 2 REAR SEAT CUSHION LOCK CABLE ASSEMBLY LH


    B205739
  1. Remove the clamp.

  1. Disconnect the 2 cable clamps and remove the No. 2 rear seat cushion lock cable assembly LH.



20. REMOVE NO. 1 REAR SEAT LOCK CABLE ASSEMBLY LH


    B205740
  1. Disconnect the 2 cable clamps and remove the No. 1 rear seat lock cable assembly LH.



21. REMOVE NO. 2 REAR SEAT CUSHION LOCK CABLE ASSEMBLY RH


    B205849
  1. Remove the clamp.

  1. Disconnect the 2 cable clamps and remove the No. 2 rear seat cushion lock cable assembly RH.



22. REMOVE NO. 1 REAR SEAT LOCK CABLE ASSEMBLY RH


    B205742
  1. Disconnect the 2 cable clamps and remove the No. 1 rear seat lock cable assembly RH.



23. REMOVE NO. 2 SEAT CUSHION FRAME SUB-ASSEMBLY


    B205743E01
  1. Remove the 2 nuts, 2 bolts<A>, 2 spiral springs and the 2 E-rings.

  1. Remove the 2 bolts <B> and the 2 bushes.

  1. Remove the 2 bolts <C>, 2 washers and the No. 2 seat cushion frame sub-assembly.