Home › BODY › SEAT › REAR NO. 2 SEAT ASSEMBLY

REAR NO. 2 SEAT ASSEMBLY > REASSEMBLY

for Preparation Click here



1. INSTALL NO. 2 SEAT CUSHION FRAME SUB-ASSEMBLY


    B205743E01
  1. Temporarily install the 2 bolts <C>, 2 washers and the No. 2 seat cushion frame sub-assembly.

  1. Temporarily install the 2 bolts <B> and the 2 bushes.

  1. Temporarily install the 2 nuts, 2 bolts <A>, 2 springs and the 2 E-rings.

  1. Tighten the 2 nuts, 2 bolts <B> and the 2 bolts <C> to install the No. 2 seat cushion frame sub-assembly.

    Torque:
    Nut:
    18 N*m{ 184 kgf*cm , 13 ft.*lbf }
    Bolt <B>, Bolt <C>:
    21 N*m{ 214 kgf*cm , 16 ft.*lbf }



2. INSTALL NO. 1 REAR SEAT LOCK CABLE ASSEMBLY RH


    B205742
  1. Connect the 2 cable clamps to install the No. 1 rear seat lock cable assembly RH.



3. INSTALL NO. 2 REAR SEAT CUSHION LOCK CABLE ASSEMBLY RH


    B205849
  1. Connect the 2 cable clamps and install the No. 2 rear seat cushion lock cable assembly RH.

  1. Install a new clamp.



4. INSTALL NO. 1 REAR SEAT LOCK CABLE ASSEMBLY LH


    B205740
  1. Connect the 2 cable clamps to install the No. 1 rear seat lock cable assembly LH.



5. INSTALL NO. 2 REAR SEAT CUSHION LOCK CABLE ASSEMBLY LH


    B205739
  1. Connect the 2 cable clamps and install the No. 2 rear seat cushion lock cable assembly LH.

  1. Install a new clamp.



6. INSTALL REAR SEATBACK EDGE PROTECTOR


    B205738
  1. Engage the 8 claws to install the 4 rear seatback edge protectors.



7. INSTALL REAR NO. 2 SEAT HEADREST ASSEMBLY RH


    B205736
  1. Install the rear No. 2 seat headrest assembly RH with the 3 nuts.

    Torque:
    14 N*m{ 143 kgf*cm , 10 ft.*lbf }

  1. Connect the 2 cable clamps.



    B205734
  1. Install the rear No. 2 seat headrest cover RH with the 2 screws.



8. INSTALL REAR NO. 2 SEAT HEADREST ASSEMBLY LH


    B205737
  1. Install the rear No. 2 seat headrest assembly LH with the 3 nuts.

    Torque:
    14 N*m{ 143 kgf*cm , 10 ft.*lbf }

  1. Connect the 2 cable clamps.



    B205735
  1. Install the rear No. 2 seat headrest cover LH with the 2 screws.



9. INSTALL NO. 2 REAR SEAT RECLINING COVER RH


    B174471
  1. Engage the guide.

  1. Install the No. 2 rear seat reclining cover RH with the screw.



10. INSTALL NO. 2 REAR SEAT RECLINING COVER LH


    B174470
  1. Engage the guide.

  1. Install the No. 2 rear seat reclining cover LH with the screw.



11. INSTALL REAR NO. 2 SEATBACK COVER SUB-ASSEMBLY


  1. Using hog ring pliers, install the rear No. 2 seatback cover sub-assembly with 18 new hog rings.


    B174469E01

    NOTICE:
    1. Be careful not to damage the cover.
    2. When installing the hog rings, take care to minimize wrinkles as much as possible.



12. INSTALL REAR NO. 2 SEATBACK COVER WITH PAD
  1. Temporarily install the rear No. 2 seatback cover with pad to the rear No. 2 seatback frame sub-assembly.



    B206723
  1. Engage the 16 clips and install the rear No. 2 seatback cover.



  1. Engage the 15 hooks.


    B205732E01

  1. Using hog ring pliers, install the rear No. 2 seatback cover with pad with 4 new hog rings.

    NOTICE:
    1. Be careful not to damage the cover.
    2. When installing the hog rings, take care to minimize wrinkles as much as possible.



13. INSTALL NO. 1 REAR SEAT COVER BEZEL


    B205730
  1. Install the No. 1 rear seat cover bezel to the No. 1 rear side seat band sub-assembly.



    B205728
  1. Engage the hook.

  1. Install the No. 1 rear seat cover bezel and the No. 1 rear side seat band sub-assembly with the 2 screws.



14. INSTALL NO. 2 SEATBACK BOARD SUB-ASSEMBLY


  1. Engage the 3 hooks.


    B205727

  1. Engage the 7 clips to install the No. 2 seatback board sub-assembly.



15. INSTALL REAR NO. 2 SEAT HANDLE


  1. Connect the 2 cable clamps as shown in the illustration.


    B173845



    B205726
  1. Install a new clamp.



    B173843
  1. Install the rear No. 2 seat handle with the 2 screws.



16. INSTALL REAR SEAT LOCK STRIKER COVER


    B173842
  1. Engage the 2 guides.

  1. Engage the claw to install the rear seat lock striker cover.



17. INSTALL NO. 1 REAR SIDE SEAT BAND SUB-ASSEMBLY


    B205722E01
  1. Attach the fastener.

  1. Install the seat track handle with the 2 new clips.



18. INSTALL REAR NO. 2 SEAT CUSHION COVER SUB-ASSEMBLY


  1. Using hog ring pliers, install the rear No. 2 seat cushion cover sub-assembly with 14 new hog rings.


    B173840E01

    NOTICE:
    1. Be careful not to damage the cover.
    2. When installing the hog rings, take care to minimize wrinkles as much as possible.



19. INSTALL REAR NO. 2 SEAT CUSHION COVER WITH PAD


  1. Using hog ring pliers, install 4 new hog rings.


    B205848E01

    NOTICE:
    1. Be careful not to damage the cover.
    2. When installing the hog rings, take care to minimize wrinkles as much as possible.



  1. Engage the 13 hooks to install the rear No. 2 seat cushion cover with pad.


    B206728



20. INSTALL NO. 2 SEAT HINGE COVER RH


    B173837
  1. Install the No. 2 seat hinge cover RH with the 2 screws.



21. INSTALL RECLINING COVER PROTECTOR RH


    B173836
  1. Install the reclining cover protector RH with the 2 screws.



22. INSTALL NO. 2 SEAT HINGE COVER LH


    B173835
  1. Install the No. 2 seat hinge cover LH with the 2 screws.



23. INSTALL RECLINING COVER PROTECTOR LH


    B173834
  1. Install the reclining cover protector LH with the 2 screws.