Home › BODY › SEAT › SEAT HEATER SWITCH

SEAT HEATER SWITCH > INSTALLATION

for Preparation Click here



1. INSTALL SEAT HEATER SWITCH


    B174533
  1. Engage the 2 claws and install the seat heater switch.



2. INSTALL CENTER INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY


    B184681E01
  1. Apply protective tape to the areas shown in the illustration.

  1. Connect each connector.

  1. Engage the 10 claws and 8 clips, and install the center instrument cluster finish panel assembly.

    NOTICE:
    Do not the damage the instrument panel safety pad assembly and lower instrument panel finish panel sub-assembly.